亚洲无区码AV无码,亚洲综合社区欧美色色干

位置>千里馬招標網> 招標中心> 高壓油管、液壓油管詢比價

高壓油管、液壓油管詢比價

山東-煙臺-龍口市狀態：公告

加入收藏

打印

導出為

更新時間:

2023年07月11日

招標單位:

立即查看

截止時間:

立即查看

招標編號:

立即查看

項目名稱:

立即查看

代理機構:

立即查看

關鍵信息:

高壓油管液壓油

招標文件:

立即查看

下文中****為隱藏內容，僅對千里馬會員用戶開放，【注冊/登錄】后可查看內容詳情

您尚未開通該權限！

咨詢客服：400-688-2000，掌握更多商機線索！

招標信息

招標單位	****	項目名稱	高壓油管、液壓油管詢比價
質保期		報名截止日期
招標郵箱	zhaobiao@nanshan.****.cn

競標保證金信息

項目保證金	500.00元	帳戶名稱	新南**公司
帳號	233****12142	開戶行	中國銀行****支行
備注
備注：競價**公司轉賬，不支**銀行柜臺現金轉賬。

供應審計部招標聯系人信息

標書聯系人	無	辦公電話	無
郵件	無

標書匯款相關信息

賬戶名稱	無	賬號	無
開戶行	無	行號	無
標書收費標準		地址、電話	無
備注：**公司轉賬，不支**銀行柜臺現金轉賬。注明標書費的用途或投標項目名稱。

物品名稱規格型號 數量單位描述

高壓油管	4SHDN381600	3.00	根	{"型號":"4SHDN381600","圖號":"無","材質":"橡膠材質:丁腈耐油橡膠.增強層:4層高抗拉鋼絲編織","接頭材質":"45號鋼","接頭尺寸":"F型法蘭連接，外徑Φ60.5高度12.5","接頭形式":"F型接頭,一直頭一90°彎頭","長度":"1600mm","壓力":"35Mpa","所屬設備名稱":"鋁型材擠壓機","設備型號":"明晟1400噸擠壓機","設備生產廠家":"明晟機電","國產/進口":"國產","使用壽命":"365天天","特殊要求":"工作介質:液壓油,4層鋼絲編織膠管,抗壓35Mpa,按圖紙加工,附圖紙","參照標準":"GB/T 3683-2011","備注":"驗收標準：符合技術要求各項規定，產品無破損，配帶密封防塵罩并附帶合格證明不合格產品處理方式：對來貨驗收不符合要求的，進行更換或退貨處理，退換貨產生的一切費用由供貨商承擔"}
高壓軟管	2SP102000	10.00	根	{"型號":"2SP102000","材質":"丁腈橡膠+二層鋼絲纏繞","接頭材質":"Q235","接頭尺寸":"M18*1.5","接頭形式":"螺紋","長度":"2000mm","壓力":"33Mpa","國產/進口":"國產","使用壽命":"365天","特殊要求":"兩端均為平口，兩直頭 ","參照標準":"JB/T 8727-2017"}
高壓軟管	4SP22800	6.00	根	{"型號":"4SP22800","材質":"丁腈橡膠+二層鋼絲纏繞","接頭材質":"Q235","接頭形式":"螺紋","長度":"800mm ","壓力":"30Mpa","國產/進口":"國產","使用壽命":"365天","特殊要求":"兩直頭,一頭螺紋：M362、錐口28mm，一頭螺紋：M362、錐口25mm","參照標準":"JB/T 8727-2017"}
高壓軟管	4SP323200	6.00	根	{"型號":"4SP323200","材質":"丁腈橡膠+四層鋼絲纏繞","接頭材質":"Q235","接頭尺寸":"M45*2","接頭形式":"螺紋","長度":"3200mm","壓力":"40Mpa","國產/進口":"國產","使用壽命":"365天","特殊要求":"兩彎頭,，彎頭朝一個方向，兩端均為錐口，錐口直徑：35mm","參照標準":"JB/T 8727-2017"}
高壓軟管	4SP-16*1400	5.00	根	{"型號":"4SP-161400","材質":"四層鋼絲編制的液壓橡膠管","接頭材質":"碳鋼","接頭尺寸":"M271.5","接頭形式":"平頭密封","使用壽命":"1095天"}
高壓油管	2SN-DN08-24-700	20.00	根	{"型號":"2SN-DN08-24-700","圖號":"無","材質":"內外膠層為耐礦物油和生物油合成橡膠，外層耐磨，耐高溫，增強層為2層高抗拉鋼絲編制而成","接頭材質":"碳鋼","接頭尺寸":"連接內螺紋M20*1.5，扳手空間24mm","接頭形式":"兩端直通","長度":"700mm","壓力":"350Bar","所屬設備名稱":"11MN擠壓機","設備型號":"11MN","設備生產廠家":"西馬克","國產/進口":"進口","使用壽命":"720天","特殊要求":"附帶24°錐密封、帶O形密封圈,連續作業溫度為-40℃~+100℃","參照標準":"GB/T 3683-2011","備注":"備注：驗收標準，附帶合格證，不符合要求的供貨商給予退貨或換貨處理"}
高壓油管	2SN-DN08-24-550	20.00	根	{"型號":"2SN-DN08-24-550","圖號":"無","材質":"內外膠層為耐礦物油和生物油合成橡膠，外層耐磨，耐高溫，增強層為2層高抗拉鋼絲編制而成","接頭材質":"碳鋼","接頭尺寸":"連接內螺紋M20*1.5，扳手空間24mm","接頭形式":"一端90度彎頭，另一端直通","長度":"550mm","壓力":"350Bar","所屬設備名稱":"11MN擠壓機","設備型號":"11MN","設備生產廠家":"西馬克","國產/進口":"進口","使用壽命":"720天","特殊要求":"附帶24°錐密封、帶O形密封圈,連續作業溫度為-40℃~+100℃","參照標準":"GB/T 3683-2011","備注":"備注：驗收標準，附帶合格證，不符合要求的供貨商給予退貨或換貨處理"}
油管	DN38*3500	10.00	根	{"型號":"DN38*3500","圖號":"無","材質":"耐油橡膠,高彈性、高強度鍍鋅金屬絲","接頭材質":"無","接頭尺寸":"無","接頭形式":"無","長度":"3500mm","壓力":"10bar","所屬設備名稱":"板式過濾器","設備型號":"無","設備生產廠家":"西馬克","國產/進口":"國產","使用壽命":"180天","特殊要求":"所用材質必須具有良好的耐軋制油性和延展性,設計制作需考慮使用時存在一定的脈沖","參照標準":"GB/T 10544-2003","備注":"結構形式:雙層耐油橡膠夾布,中間單根螺旋金屬絲.驗收要求:到貨不符合技術要求.退換貨處理,所產生的的費用由供貨方承擔."}
高壓油管	DN6100018	2.00	根	{"型號":"DN6100018","圖號":"無","材質":"丁腈橡膠+二層鋼絲","接頭材質":"碳鋼","接頭尺寸":"M181.5","接頭形式":"螺紋","長度":"1000mm","壓力":"40Mpa","所屬設備名稱":"縱切","設備型號":"201***70143","設備生產廠家":"達涅利","國產/進口":"進口","使用壽命":"360天","特殊要求":"一頭90°直角接頭,一頭為0°直通接頭,兩端錐口24°","參照標準":"JB/T 8727-2017","備注":"到貨物資與技術要求不符時,退貨換貨處理,由此產生的費用由供貨方承擔"}
高壓軟管	2SP10800	9.00	根	{"型號":"2SP10800","材質":"丁腈橡膠+二層鋼絲纏繞","接頭材質":"Q235","接頭尺寸":"M18*1.5","接頭形式":"螺紋","長度":"800mm","壓力":"27.5Mpa","國產/進口":"國產","使用壽命":"365天","特殊要求":"兩端均為平口，一直一彎","參照標準":"JB/T 8727-2017"}
膠管總成	2S-12-1500	4.00	根	{"型號":"2S-12-1500","圖號":"無","材質":"內外層為合成橡膠,二層鋼絲","接頭材質":"碳鋼","接頭尺寸":"M241.5","接頭形式":"內螺紋連接","長度":"1500mm","壓力":"100bar","所屬設備名稱":"鋁箔軋機","設備型號":"280/8502000","設備生產廠家":"阿亨巴赫","國產/進口":"國產","使用壽命":"365天","特殊要求":"無","參照標準":"JB/T 6142.1-2007","備注":"到貨驗收標準:1.包裝完好,內部備件無破碎和損壞.2.型號,參數等必須符合技術要求.3.升級型號的或替代型號的備件應帶有升級或替代證明.4.若不符合技術要求或出現質量問題,則退換貨,產生的費用由供貨方承擔."}
液壓油管	4252200	4.00	根	{"型號":"4252200","圖號":"無","材質":"膠管材質為耐油合成橡膠，四層高強鋼編增強層，外部為304不銹鋼鋼編編制；O型圈材質為丁腈橡膠。","接頭材質":"碳鋼","接頭尺寸":"一直頭F=φ44mm圓形法蘭帶O型圈，一90°彎頭C型連接螺母1 5/16\"*12牙","接頭形式":"一F頭，一C型頭","長度":"2200mm","壓力":"30Mpa","所屬設備名稱":"熔煉爐","設備型號":"75T","設備生產廠家":"布里克蒙","國產/進口":"國產","使用壽命":"365天","特殊要求":"工作介質:液壓油","參照標準":"GB/T 3683-2011","備注":"驗收標準:到貨與技術要求不相符,必須進行退換貨.費用由供貨商全部承擔."}
液壓油管	4192400	2.00	根	{"型號":"4192400","圖號":"無","材質":"膠管材質為耐油合成橡膠，四層高強鋼編增強層，外部為304不銹鋼鋼編編制；O型圈材質為丁腈橡膠。","接頭材質":"Q235碳鋼","接頭尺寸":"一直頭F=φ38mm圓形法蘭帶O型圈，一90°彎頭C型連接螺母1 1/16\"*12牙","接頭形式":"一F頭，一C型頭","長度":"2400±10mm","壓力":"30Mpa","所屬設備名稱":"熔煉爐","設備型號":"75T","設備生產廠家":"布里克蒙","國產/進口":"國產","使用壽命":"365天","特殊要求":"工作介質:液壓油","參照標準":"GB/T 3683-2011","備注":"驗收標準：到貨后若與技術附件不相符,必須進行退換貨.費用由供貨商全部承擔."}
液壓軟管	DN16*7750mm	8.00	根	{"型號":"DN167750mm","圖號":"無","材質":"內膠層:耐油合成橡膠，中間兩層高強鋼絲鋼編，外膠層：耐腐蝕合成橡膠","接頭材質":"碳鋼","接頭尺寸":"M221.5","接頭形式":"兩直頭，錐形口帶O型圈，24度錐口密封，螺紋擰緊連接","長度":"7750±100mm","壓力":"35Mpa","所屬設備名稱":"清洗線","設備型號":"0.5-4.02650mm","設備生產廠家":"***公司","國產/進口":"國產","使用壽命":"1095天","特殊要求":"無","參照標準":"JB/T 8727-2017","備注":"1.產品外包裝完好，無破損。\n2.產品應附帶合格證。\n3.如與技術要求不符，執行退貨處理，所產生的費用由供應商承擔；"}

投標廠商資質
注冊資金		專業資質
公司業績
相關認證

注冊會員享貼心服務

項目查詢服務

·讓您全面及時掌握全國各省市擬建、報批、立項、施工在建項目的項目信息

·幫您跟對合適的項目、找對準確的負責人，全面掌握各項目的業主單位、設計院、總包單位、施工企業的項目經理、項目負責人的詳細聯系方式

·幫您第一時間獲得全國項目業主、招標代理公司和政府采購中心發布的招標、中標項目信息

項目定制服務

·根據您的關注重點定制項目，從海量的項目中篩選出符合您的要求和標準的工程并及時找出關鍵負責人和聯系方式

·根據您的需要，向您指定的手機、電子郵箱及時反饋項目進展情況